Steris Resert Revital-Ox HLD
STERIS RESERT Revital-Ox HLD
The gold-standard FDA-cleared high-level disinfectant for ultrasound probes, flexible endoscopes, and semi-critical medical devices. 8-minute contact time. No glutaraldehyde. Trusted in over 5,000 U.S. healthcare facilities.
Why Clinics Switch to Revital-Ox
| Feature | Revital-Ox RESERT (AHP) | Glutaraldehyde | OPA (Cidex) |
|---|---|---|---|
| HLD contact time | 8 minutes | 20–45 minutes | 12 minutes |
| Toxic fumes / vapors | None — virtually odorless | Yes — OSHA ceiling 0.2 ppm | Mild odor |
| Special ventilation required | No | Yes — exhaust hoods required | Recommended |
| Staff sensitization risk | None | High — cumulative exposure | Moderate |
| Rinse steps | 1 water rinse | 3 water rinses | 1–3 rinses |
| Biodegradable | Yes — breaks to H²O + O² | No — hazardous waste disposal | No |
| Compatible with ultrasound probes | Yes — tested by major OEMs | May cause crazing/discoloration | Yes |
| FDA cleared for HLD | ✓ | ✓ | ✓ |
| MRC test strip required | Yes — R60 strips (PCC053/054) | Yes | Yes |
60-Second MRC Test Protocol
STERIS protocol and all major accreditation bodies (TJC, AAAHC, DNV) require MRC testing before every HLD use cycle. The R60 test strips (PCC053/PCC054) verify the solution meets the 1.5% H²O² minimum threshold.
Product Specifications
Volume & Dosing Guide
Use this guide to estimate monthly usage and select the right size for your facility.
| Facility Type | Daily Reprocessing Cycles | Approx. Monthly Volume | Recommended Size | Est. Monthly Cost |
|---|---|---|---|---|
| Single-probe ultrasound clinic | 1–2 cycles/day | 1–2L / month | 1L × 2 | ~$82.50 |
| Multi-probe imaging center | 4–6 cycles/day | 4–6L / month | 4L × 1–2 | ~$107–$215 |
| Endoscopy suite (low volume) | 6–10 scopes/day | 6–10L / month | 4L × 2–3 | ~$215–$322 |
| Endoscopy suite (high volume) | 15–30 scopes/day | 15–30L / month | 4L × 4–8 | ~$430–$860 |
| Veterinary clinic | 1–3 cycles/day | 1–3L / month | 1L × 2–3 | ~$82–$124 |
*Volume estimates assume ~900mL per standard probe soaking trough or ~2–3L per endoscope reprocessing basin. Contact us for custom facility volume pricing.
Accreditation & Compliance Requirements
Failure to test and document MRC before each HLD cycle is a citable deficiency during inspection by all major accreditation bodies.
Order STERIS RESERT Revital-Ox from SONO Supplies
• Ideal for 1–3 probes/day
• Single-use convenience
• Subscribe & Save available
• Ideal for high-volume facilities
• 35% savings vs 1L per-liter cost
• Long-dated stock (Sep 2027)
• 1-bottle or 2-bottle options
• TJC / AAAHC / DNV compliant
• Subscribe & Save available
Frequently Asked Questions
What devices can be reprocessed with Revital-Ox RESERT?
Revital-Ox is FDA-cleared for high-level disinfection of reusable semi-critical medical devices including ultrasound transducers, flexible endoscopes, laryngoscope blades, and other heat-sensitive instruments that contact mucous membranes or intact skin.
How does Revital-Ox compare to glutaraldehyde?
Revital-Ox achieves HLD in 8 minutes vs 20–45 minutes for glutaraldehyde, requires no special ventilation, produces no toxic fumes, needs only one water rinse vs three, and is biodegradable. Staff sensitization is not a risk with Revital-Ox.
Is Revital-Ox compatible with GE, Philips, and Siemens ultrasound probes?
Yes. Revital-Ox RESERT has been compatibility-tested by major ultrasound OEMs and approved in reprocessing IFUs for most GE Healthcare, Philips, Siemens Healthineers, and Mindray systems. Always verify against your specific model's current IFU.
Why do I need R60 test strips?
STERIS protocol and accreditation standards (TJC, AAAHC, DNV GL) require MRC verification before each use cycle. PCC053/PCC054 are the only STERIS-approved strips for Revital-Ox RESERT. Skipping the test is a compliance failure.
Is SONO an authorized STERIS distributor?
Yes. SONO Supplies is a verified, authorized distributor of STERIS products. All inventory is sourced directly from STERIS with full traceability and verified expiration dates. New stock received monthly.
Can I set up a recurring order for my facility?
Yes — use Subscribe & Save at checkout to configure monthly, bi-monthly, or quarterly auto-delivery. Contact us at (855) 879-4737 or sales@sonosupplies.com for custom facility billing, net terms, or volume pricing.



